Pump start-up function

In order to generate a rapid response after switch on the unit or after modification the set value, the pump runs at the set speed. As soon as the set value of the currently controlled temperature is reached, the previously set operating mode of the pump is automatically adopted.

NOTE!

The pump start-up function only applies to pump operating mode "Eco-mode ...".

1. Select [Setting] > [Pump Control] > [Pump Start-up Function]

2. Use the slider (, ) to turn the function on or off.

start-up function speed

1. Select [Setting] > [Pump Control] > [Set Startup Speed]
2. Set the parameter to the desired value

→ The speed setting range, click here...