HB-100/140/160/180Z62 data

Basic data
Type	HB-100Z62	HB-140Z62	HB-160Z62	HB-180Z62
Temperature max.	100 °C	140 °C	160 °C	180 °C
Circulating volume in unit (approx.)	4T/4S: 2,0 L 6P/6R: 3,0 L
Dimensions
(height/width/depth)	650 mm / 300 mm / 991 mm
Weight max.	4T: 73 kg 6P: 86 kg	4S: 78 kg 6R: 90 kg
Environment
Temperature range	5–40 °C
Relative humidity	35–85 % RH (non-condensing)
Continuous sound pressure level	<70 dB(A)
Surface temperature (back of the device )	>55 °C
Cleanroom capability	«At Rest» <ISO Classe 6 (Cl. 1000) «In Operation» ISO Classe 7 (Cl. 10 000)
Temperature measurement
resolution	0,1 °C
Control accuracy	±0,1 °C
Tolerance	±0,8 °C
Flow rate measurement
measuring range	4T/4S: 0,4–65 L/min 6P/6R: 1–150 L/min
resolution	0,1 L/min
Tolerance	4T/4S: ± (5% of measured value + 0,1 L/min) 6P/6R: ± (5% of of measured value + 0.25 l/min)
Pump pressure indicator
Tolerance	±10% of rated value

Hydraulic data
Connection	HB-100Z62	HB-140Z62	HB-160Z62	HB-180Z62
Main line, Return line
Pump thread	4T/4S: G3/4 6P/6R: G1 1/4
Resistance (including external heat transfer circuit)	20 bar, 120 °C	20 bar, 160 °C	20 bar, 180 °C	25 bar, 200 °C
Cooling water
Pressure	2–5 bar
Thread when cooling	A2 (40 kW @ 60 K): G3/8 B2 (65 kW @ 60 K): G3/8 E2 (120 kW @ 60 K): G3/4
Resistance	10 bar, 100 °C
Separate cooling water
Pressure	2–5 bar
Thread when cooling	A2 (40 kW @ 60 K): G1/4 B2 (65 kW @ 60 K): G1/4 E2 (120 kW @ 60 K): G1/2
Resistance	10 bar, 100 °C
Compressed air (additional equipment ZG)
Pressure	2–8 bar *
Pump thread	4T/4S: G1/4 (AIR IN, AIR OUT) 6P/6R: G3/8 (AIR IN), G1/2 (AIR OUT)
Resistance	10 bar, 100 °C
Drain (only with 6P/6R radial wheel pump, without additional equipment ZG/ZN)
thread	G1/4

* Mould emptying is more efficient with higher compressed air

Electrical data
Residual current circuit-breaker	We recommend using a type B residual current circuit breaker (RCD), as the temperature control units are equipped with a frequency converter. Type A RCD are not suitable. The leakage current is max. 5 mA per unit.
Mains cable to unit	3LPE, 4 m (Standard) H07RN-F (Standard) / H07BQ-F (CE) SO/SOW/SOOW (UL/CSA)
Cross-section	400/460 V 8 kW: 4x2,5 mm2 (CE) / 4xAWG 12 (UL/CSA) 16 kW: 4x6,0 mm2 (CE) / 4xAWG 10 (UL/CSA) 32 kW: 4x16,0 mm2 (CE) / 4xAWG 4 (UL/CSA) 220 V 8 kW: 4x6,0 mm2 (CE) / 4xAWG 10 (UL/CSA) 16 kW: 4x16,0 mm2 (CE) / 4xAWG 4 (UL/CSA) 32 kW: 4x50,0 mm2 (CE) / 4xAWG 2 (UL/CSA)
Network system
	TN-System A TN-System (network with grounded protective conductor) is common in Europe. The unit can be connected and operated with this network system without any measures.
	High-Leg-Delta-System A High-Leg-Delta-System, in which a midpoint is grounded between two phases, is common in Asia and North America. Starting with software-version SW61-1_2401, The unit can be connected and operated to this network system without any measures.
	Corner-Grounded-Delta-System A Corner-Grounded-Delta-System, in which one phase is grounded, is common in Asia and North America. Starting with software-version SW61-1_2401, The unit can be connected and operated to this network system without any measures.
	IT-System In an IT-System where there is no galvanic connection between active conductors and grounded parts, measures are required: When connection to an IT-System, remove the IT screw at the inlet of the frequency inverter (Fig.). Otherwise, the leakage currents of the frequency converter may trigger the residual current circuit breaker. operation without IT screws poses no safety risk, but EMC interference emissions can increase. Compliance with EMC limits is the responsibility of the operator.
Heating capacity	The heating capacity is valid at rated voltage (400 V, 460 V or 210 V) and varies by a maximum of ± 10% within the specified voltage range.
Mains voltage	see nameplate on the unit
Maximum fusing	see nameplate on the unit
Rated short circuit current	6 kA (I_max ≤63 A) 10 kA (I_max = 125 A)
Overvoltage category	II
Degree of contamination	2
Protection class	IP 44

Download PDF

HB-100/140/160/180Z62 data

Datenschutz - Data protection - Protection de données