To generate a quick response after the unit is switched on or after a modification the setpoint value, the pump runs at the set speed. As soon as the set value of the currently controlled temperature is reached, the previously set operating mode of the pump is automatically adopted.

NOTE!

The pump start-up function only applies to the "” pump operating mode. Eco-mode ...

  1. Select [Setting] > [Pump Control] > [pump Start-up Function]

  2. Use the slider (, ) to switch the function on or off.

Speed of the start-up function

  1. Select [Setting] > [Pump Control] > Set startup speed]
  2. Set the parameter to the desired value
    → For the speed setting range, see here...