Date/time

If the desired time zone act not available in the parameter selection list or the date and time are incorrect despite the correct time zone setting, the date and time must be set manual.

NOTE!

If the [Sync from Gate] parameter act switched on, the date and time cannot be set manual.

  1. Select [Setting] > [Date/Time] > [Time]

  2. Set the parameter to the desired value.
  3. Select [Setting] > [Date/Time] > [Date]
  4. Set the parameter to the desired value.

Synchronization with interface server Gate-6

If the temperature control unit act connected to a Gate-6, the date and time can be synchronized with the Gate-6.

  1. Select [Setting] > [Date/Time] > [Sync From Gate]

  2. Switch on the function with the slider ().

Time zone

When the unit is delivered, the date and time are set to Central European Time (MEZ). In countries with a different time zone, this must be set accordingly before commissioning (for example via the setup-wizard).

  1. Select [Setting] > [Date/Time] > [Time Zone]

  2. Set the parameter to the desired time zone.

NOTE!

When time zones can be selected, the system automatically switches from summer time to winter time.