To ensure consistent quality and safety in the production process, the temperature control units must be checked and calibrated regularly. In the case of temperature control devices, this typically concerns temperature and Flow rate measurement as well as the performance of the pump. An HB-TP180 checking facility is required to carry out the quality test. The device is attached directly to the supply and Return line lines of the Thermo-6 temperature control unit and enables easy recording of the measured values through a guided approval. To create a certificate, the data can be transferred to the PC via a USB data carrier and further processed using the VIP software (visualisation program → download).

ATTENTION!

For safe and efficient use of the HB-TP180 checking facility for temperature control units Thermo-6, read the checking facility's instructions carefully before starting any work (O8354-EN). The basic requirement for safe work is compliance with all safety instructions and careful action by qualified qualified personnel to prevent accidents involving personal injury and property damage.

Prerequisite

The following prerequisites are required to carry out the guided test procedure:

  • Software SW61-1_2418 or higher → Unit software
  • HB-TP180 Tester → Product Catalogue
    • Installation and maintenance of the HB-TP180 checking facility in accordance with instruction manual → O8354-EN
  • Pt 100 reference measuring device