The Gate-6 communicates with the e-cockpit app via Bluetooth. To use the functionality of the e-cockpit app (click here), the Gate-6 must be connected to the e-cockpit. The connection to connect the e-cockpit app to the Gate-6 is done by command a Thermo-6 unit connected to the Gate-6.

Prerequisites

  • Interface Server Gate-6 connected to at least one Thermo-6 unit (click here).
  • E-cockpit app installed on tablet or smartphone (click here).
  • Observe the Bluetooth range of Gate-6 (click here).

NOTE!

Communication between Gate-6 and the e-cockpit app takes place via Bluetooth. For larger amounts of data (e.g. “sending analysis data”, the system automatically switches to WLAN).

Coupling

  1. On the basic screen of the Thermo-6 unit connected to the Gate-6, tap the main menu button ().
  2. Select [Gate ] > [Bluetooth ].
    → Switch on the Bluetooth interface [Bluetooth] with the slider ().

    NOTE!

    If the parameter [Bluetooth] is not displayed in the menu [Gate], the Thermo-6 unit is not connected to a Gate-6.

  3. Select [Gate] > [Connect coupling the e-cockpit] → The process is started and the display window with the QR-Code appears on the display (Fig.).
  4. Open the e-cockpit app.
  5. Tap the QR code scanner () or the “Add New Gate-6” tile.
  6. Scanning the QR-Code with your tablet or smartphone using the e-cockpit app.
    → The QR-Code is scanned and the pairing takes place.

The Units are connected when the Bluetooth connection confirmation code matches and is confirmed. The connection to the e-cockpit app is now established and the corresponding Gate-6 and the connected temperature control units Thermo-6 are visible in the overview.

Decoupling (e-cockpit)

  1. Open the e-cockpit app.
  2. Select Gate-6 from the overview.
    → The overview not only shows Gate-6 with an active connection, but also all previously connected Gate-6.
  3. Hold down the selected Gate-6 and drag it to the left (Fig.)
  4. Tap the trash can symbol ().
    → The Gate-6 is now deleted from the overview and is no longer linked to the e-cockpit app.

Decoupling (Gate-6/Thermo-6)

  1. On the basic screen of the Thermo-6 unit connected to the Gate-6, tap the main menu button ().
  2. Select [Gate] > [Bluetooth] > [Paired units]
  3. Select the appropriate unit and tap the trash can symbol ().
    → The unit is now deleted from the overview and is no longer connected to Gate-6.